- Home
- Measuring guide | Blinds
Measuring guide | Curtains
A step-by-step Kluxe guide to ensure your made-to-measure curtains fit perfectly.
Step 1
Measuring the width
For a pole: Measure the pole width, excluding the decorative finials at each end.
For a track: Measure the total width from end to end.
For our made-to-measure curtains service, this is all the information we need, as we handle all necessary allowances. If you would like your curtains to return neatly to the wall, please contact us for guidance.
Tips if making your own curtains:
Add 6–8 cm per curtain for a comfortable overlap where the curtains meet at the center.
For returns to the wall, measure the distance from the rings or gliders back to the wall on each side, and add these dimensions to the total width.
For single curtains, note the width and whether it will hang on the right or left.
Important: If your curtains are planned to return to the wall, the curtain top must be slightly lower than the bottom of the pole to avoid obstruction.
For fitting outside the window reveal
The finished length is the distance from the very top of your curtain to the bottom hem. Always measure at three points—left, right, and center of your pole or track—and choose the measurement that best suits your space.
Tab Top Headings
Measure from the top of the pole to your desired bottom hem—this is the drop.
Add the diameter of the pole to this drop to account for the portion of the curtain lost when threading the tabs onto the pole. This gives your finished length.
Eyelet Headings
Measure from the top of the pole to the desired bottom hem—this is the eyelet drop.
Add 3.5 cm (1.38”) for the fabric above the eyelet, giving your finished length.
Gathered and Pencil Pleat Headings
The top of our gathered curtains sits 3.5 cm (1.38”) above the hook.
Measure from the ring or glider eyes to the desired bottom hem—this is the hook drop.
Add 3.5 cm (1.38”) to determine the finished length.
All Other Headings
Decide where you want the top of the curtain to finish.
For tracks: Align with the top of the track.
For poles: Align with the top, center, or bottom of the pole, depending on your style.
Measure from this top position to the bottom hem. This measurement is your finished length.
Not Yet Fixed a Pole or Track?
We recommend having your pole or track in place before measuring, but if that’s not possible, follow these steps:
Step 1 – Choose Your Pole or Track
Decide on the type of pole or track you plan to use. This will guide your measurements and style choices.
Step 2 – Decide the Positioning
For a standard window without architraves:
The pole or track should overhang the window by at least 15 cm (6″) on each side.
The bottom of the pole or track should typically sit no less than 8 cm (3″) above the top of the window soffit.
Step 3 – Measure as Usual
Once you have your pole or track type and position in mind, follow the same process outlined in Steps 1 and 2 of our Measuring Guide. For accuracy, make small pencil marks to check you’re happy with both the top and hem positions.
Why KLUXE Window Treatments?
Free Interior Design
Service
Unlimited Product
Selection
Top
Rated
Competitive Pricing
Fully Insured
We Match Any Price + 10% Discount
Send us your estimate – if we’re confident we can match or exceed the quality, we’ll match the price and provide 10% off.
On all orders over $250.00
Direct to the customer
Upto 10 FREE samples
Our blinds are forever
Partnership Opportunity
Interior Designers
General Contractors
Referral Partnerships
Leave information to receive a free consultation
Testimonial
We’re so happy we went with Kluxe for our new build in Long Island. Their craftsmanship and attention to detail truly elevated the entire project.
Our designer recommended Kluxe and they did not disappoint. The motorized shades are incredibly quiet, and the remote blends right in with our décor.
Working with Kluxe was an absolute pleasure. They respected our time, offered honest recommendations, and the final result looks stunning in our Upper West Side apartment.
Kluxe took care of every detail. From fabric samples to final install, they made sure our Brooklyn brownstone had the perfect window treatments throughout.
Exceptional service, flawless results. Kluxe gave our home a high-end look without any stress. I’d recommend them to anyone who values quality and design.
I’ve worked with many vendors in Manhattan, and Kluxe stands out. They were responsive, creative, and the final install was museum-quality perfect.
We chose Kluxe for our office windows, and they balanced aesthetics and function perfectly. The blackout options are a game changer for our media room.
I was so impressed by how organized and thoughtful the Kluxe process was. Our custom drapery fits beautifully in our pre-war Upper East Side apartment.
Luxury, comfort, and precision—Kluxe delivered all three. Their team made our downtown loft feel like a five-star hotel.
Kluxe completely transformed our space. Their team helped me choose fabrics that matched our interiors perfectly, and the installation in our Chelsea condo was seamless.